BDYNS - MIL-L-24479B,TYPE I,LUBRICANT KIT(MINERLOIL

  • MSDS: BDYNS
  • Manufacturer: GRAPHITE PRODUCTS CORP
  • Product Name: MIL-L-24479B,TYPE I,LUBRICANT KIT(MINERLOIL
  • National Stock Number: 9150-00-424-3215
Product Identification

Product ID:MIL-L-24479B,TYPE I,LUBRICANT KIT(MINERLOIL
MSDS Date:01/01/1987
FSC:9150
NIIN:00-424-3215
Kit Part:Y
MSDS Number: BDYNS

Responsible Party
GRAPHITE PRODUCTS CORPORATION

Emergency Phone: (216)394-1617

Cage: 60218

Contractor
GRAPHITE PRODUCTS CORP
207 BROOKFIELD, OH 44403-9507 US

Telephone: 216-394-1617

Cage: 60218

Ingredients

MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: 100%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3/10 STEL;9192

Hazards

Effects of Overexposure:NONE KNOWN.AVOID INHALATION OF OIL MIST.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:>420F(215.6C)COC
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:DO NOT USE A SOLID STREAM OF WATER
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.

Handling

Handling and Storage Precautions:STORE AWAY FROM EXCESSIVE HEAT & OPEN
FLAMES
Other Precautions:NONE SPECIFIED

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:OIL RESISTANT
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
THIS DESCRIBES PART C (MINERAL OIL) OF 3 PART KIT.KEY1:N1.

Chemical Properties

HCC:V6
Vapor Pres:UNK
Vapor Density:UNKN
Spec Gravity:0.85
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR OILY,YELLOW-BROWN LIQUID,OILY ODOR
Percent Volatiles by Volume:0.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NOT SPECIFIED
Hazardous Decomposition Products:CO CO*2

Disposal

Waste Disposal Methods:CAN BE INCINERATED UNDER CONTROLLED
CONDITIONS,OR DISPOSE OF IN APPROVED DUMP IN ACCORDANCE WITH
LOCAL,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.